MIL-HS-A Analysis Heating Hoses
Our analysis heating hoses are used especially in the automotive sector. Depending on the model, exhaust gas measurements can be carried out at temperatures from 200°C to 550°C. They reliably prevent dew point formation, which means that measurements are not falsified and clogging of the hose by dirt particles is minimized. On request, we also offer our analysis heating hoses with stainless steel pipe sockets or in other variants. The flexible heating of the sampling line ensures a constant temperature during the measurements.
Technical data
| Operating temperature | max. 100 °C / 200 °C / 250 °C / 300 °C / 350 °C |
| Nominal voltage | 230 V AC, other voltages are possible on request |
| Nominal diameter | Customized |
| Pressure hose | Up to 250 °C with PTFE or PFA hose, from 250 °C with corrugated stainless steel hose or stainless steel pipe (nominal diameter on request) |
| Connection fittings | Customized; PTFE hose, according to the value of the diameter |
| Heating cable | Insulated with PFA or PTFE and protective braiding, depending on the version; moisture-protected up to 250°C; 350°C with glass and not moisture-protected |
| Temperature sensor | Pt 100 or thermocouple |
| Thermal insulation | Fine-pored rubber hose at 100 °C, heat-insulated silicone hose at 200 °C / 250 °C |
| External protective braiding | Polyamide braid, corrugated hose, metal braid, VA braid |
| Mains connection | 1,5 meter leads |
| Hose end caps | Silicone rubber cap or hard cap with cable strain relief, PG cable gland |
| Production length | on request |
