MIL-HJD-200S-EX
Drum heating jacket in EX version
Ready-to-connect flexible heating jacket with insulation for standard 200-liter DIN drums, can be used in potentially explosive atmospheres
- Simple assembly and disassembly
- No additional thermal insulation necessary
- High-quality, robust finish
- Hard-wearing electrostatically dissipative material
Note:
Please note that the entire system must be inspected and approved by an expert before commissioning! This article is not an ATEX-certified complete system and is only supplied with type examination certificates for the electrical components used!
Technical data
| Nominal voltage | 230 V AC |
| Rated power | see order data |
| Jacket material | electrostatically revulsive PTFE coated fabric |
| Heatsealing band | PTFE-insulated resistance element with protective braiding |
| Temperature class | T3 to T6 depending on controller/limiter setting |
| Temperature range controller | -20 up to 50°C / 0 up to 120°C / 0 up to 200°C |
| Temperature range limiter | 0 up to 200°C |
| Ambient temperature | -40°C up to + 60°C |
| Zones | 1+2 (gas), 21+22 (dust) |
| Mounting type | Velcro tape system |
| Protection class | I |
| Protection type | IP 64 |
| Mains connection cable | 3,0 m long without plug for fixed connection |
Order data
| Type | Power
W |
Dimension
mm |
Item no. |
| MIL-HJD-200S-EX | 750 | 1840 x 880 | 42002880 |
| MIL-HJD-200SH-EX | 1750 | 1840 x 880 | 42002885 |
Related products
-
MIL-IBC1000
Heating jacket for IBC up to 90°C -
MIL-IBC-1000-EX
Heating jacket for IBC containers in EX design -
MIL-HBD-200H
Drum bottom heater up to 200°C -
MIL-HJD
Drum heating jacket up to 200°C